How to flash Stock Rom Using SP Flash
Tool
In this Page we will know about the How to flash Stock Rom Using SP Flash Tool.
So please follow given these blow mentions instructions
Please keep in Mind
Your android phone should have minimum 40-60 percent of your
phone battery to perform the completed flashing process.
Step 1: first you have to ensure that you must
install the Android USB Download otherwise you can Download .if you have
already no need to download.
Step 2: Power Off your Android Phone and remove the battery if it
is removable.
Step 3: Now download the Stock Rom or Custom Rom which you can flash your Android
Device and extract in your Computer anywhere.
Step 4: Download SP Flash Tool Latest version and
extract on your Computer, when you will finish the extracting the SP flash tool
you will be able to see the following files given in Screenshot.
Step 5: now you will open flash_tool.exe and
open it. now you will found the software Pop-Up.
Step 6: Now click on the Download Tab after click
on the scatter –loading button like as given image.
Step 7: Now open (locate) the Scatter File you
will find this scatter file in Stock Rom Folder.
Step 8: Now click on the Download to start the
Flashing process.
Step 9: Now connect your Android phone via USB
without battery. After connect the device to the computer press Volume Down or
Volume UP key. After then your phone will be connect and it will be flashed.
Step 10: After your Flashing will completed a
Green Ring Will appear.
Step 11: now you can close the SP Flash tool on
your Computer and unplugged your device from the computer.
Please keep these all thing in Mind
v Backup: please take backup the all-important
data before using the Flashing with the SP Flash Tool because during this
process your data will removed permanently.
|